General
All standard leaves are die cut from .020" leaded brass engraving stock.
They are shipped preinstalled to the acrylic tree tops using 4/40 X 3/16"
brass round head machine screws. When we attach the leaves to the acrylic
top, the clear protective sheeting is removed from each leaf. If we
pre-ship the leaves for engraving, the clear sheeting will be left on
the leaves for protection.
The
stones for our traditional trees are sculpted cast bronze and have an
.020" leaded brass plate attached to the surface for engraving. The
contemporary stones are cut from 1/4" thick yellow brass (which matches
the contemporary trunk) and also come with an .020" leaded brass plate for
engraving.
We
can provide engraving for these products.
Leaves
Standard Leaf
 |
-
Size: 4" X 1-1/2" x .020"
-
Material: Leaded brass
-
Usage: T1, T2, T3, T7, T9, T10 and T12 trees
|
French
Curve Leaf
 |
-
Size: 4-3/4" x 2-1/8" x.020"
-
Material: Leaded brass
-
Usage: T4, T5, T6, T8 and T11 trees
|
Keepsake Leaf
 |
-
Size: 2-3/4" x 1-3/8" X.020"
-
Material: Leaded brass
-
Usage: Keepsake trees (all sizes)
|
Stones
Small Bronze
 |
-
Size: 5-1/2" x 3-1/2"
-
Material: Cast bronze stone
with 4-3/4" x 2-3/4" x .020" blank brass plate for engraving
|
Large Bronze
 |
-
Size: 7-1/2" x 5"
-
Material: Cast bronze stone
with 5-3/4" x 3-7/8" x .020" blank brass plate for engraving
|
Small Brass
 |
-
Size: 7" x 4-3/4"
-
Material: 1/4" thick cut out yellow brass with 4-3/4" x 2-3/4" x
.020" blank brass plate for engraving
|
Large Brass
 |
-
Size: 11-1/2" x 8"
-
Material: 1/4" thick cut out yellow brass with 5-3/4" x 3-7/8" x
.020" blank brass plate for engraving
|
Cast Donor Stone
 |
-
Size: 12" x 8", "Rock-Edge" border design
-
Material: Cast bronze with integral, cast copy (up to four lines)
|
Helpful Hints
-
If donor names are known at the time the tree is ordered, request that
the leaves be engraved when placing the order.
-
Handle leaves carefully when removing or replacing from the tree top. To
prevent scratching, wrap each leaf separately, allowing no contact with
other leaves.
-
Different material colors (brass, silver and copper) can be used to
designate different levels of giving or recognition.
Back to Bronze
Recognition Tree page
|
